Another write-up on the srtforums...but not on here. I decided to do this today after the re-wire mod because i know im sick of listening to my e-brake rattle. This is a super simple and fast fix.
Tools needed:
Wire snips
Phillip screwdriver
Supplies needed:
Wire coat hanger or peice of steel wire
#1...Release the e-brake (make sure the car dont roll). Take out the center counsole insert by removing the 8 screws that hold it in...or in my case 7 lol. The write-up i read said to remove the whole center counsole...but that doesnt need to be done.
#2...Locate the little toothed guy doing all the rattling, you will be able to move it side to side with your finger.
#3...Cut a peice of wire estimate of 6" long or cut the hoop off a wire hanger...bend them to a kinda tight U. Insert it between the side plate and the toothed guy making all the noise.
#4...Push it all the way in...and the toothed guy shouldnt wiggle anymore.
#5...Put the insert back in, start up the car and see if it worked...i know it did with mine!










Reply With Quote








